BAUDIO 15NDF100C1 Line Array Speakers – 15 inches
4-Inch Copper Voice Coil
100.6dB/SPL Sensitivity
1500Watt Program Power Handling
FEM Optimized Motor And Suspensions
Optimized Cooling System
Resonance-Free And Heavy Duty Basket Design
Dual Gap Motors Linearize Inductance
Ideal For Two-Ways And Line Array Application
| Brand |
B AUDIO |
|---|---|
| Model |
15NDF100C1 |
General Specifications
| Nominal Diameter | 375~393 mm (15 in.) |
| Nominal Impedance | 8 Ω |
| Minimum Impedance | 5.9 Ω |
| Program Power (1) | 750 W |
| AES Power Rating (2) | 1500 W |
| Sensitivity (3) | 100.6 dB |
| Frequency Range | 45~3000 Hz |
| Voice Coil Diameter | 100 mm (4 in.) |
| Chassis Material | Aluminium |
| Magnet Material | Neodymium |
| Magnet Dimensions (OD x ID x h) | 97 x 25 x 10 mm (1 pc) |
| Coil Material | ALR |
| Former Material | Glass Fiber |
| Xmax (4) | 6 mm |
| Xmech (5) | 13 mm |
| Gap Height | 12 x 2 mm |
| Voice Coil Winding Height | 40 mm |
Small Signal Parameters
| DC Resistance (Re) | 5 Ω |
| Resonance Frequency (Fs) | 45 Hz |
| Moving Mass (Mms) | 81 g |
| Compliance (Cms) | 0.16 mm/N |
| Force Factor (BL) | 21.6 N/A |
| Mechanical Q-Factor (Qms) | 5.62 |
| Electrical Q-Factor (Qes) | 0.30 |
| Total Q-Factor (Qts) | 0.28 |
| Equivalent Air Volume (Vas) | 188 l |
| Voice Coil Inductance (Le) | 1.4 mH |
| Diaphragm Area (Sd) | 924 cm² |
| Reference Efficiency (Eta O) | 5.3% |
Shipping Information
| Net Weight | 4.3 kg |
| Multipack Size (W x D x H) | 410 x 410 x 218 mm |
| Multipack Weight | 4.9 kg |
OTHERS
(1)Program power is defined as 3 dB greater than AES Power.
(2) Tested for two hours using a continuous, band-limited pink noise signal as per AES 2-1984 Rev. 2003. Loudspeaker tested in free air.
(3) From T/S parameters, measured with LMS DA LPM module.
(4) The Xmax is calculated as: (Hvc – Hg)/2+ Hg/4. Hvc is the voice coil height and Hg the gap height.
(5) The Xmech is calculated as: (Hvc – Hg)/2 +(Hg-2). Hvc is the voice coil height and Hg the gap height.
(6) Thiele-Small parameters are measured after preconditioning: a) at 20°C- 22°C, 50% humidity for 2 hours; b) by LMS LSI measurement.
Reviews
There are no reviews yet.